Design and Fabrication of Rectifying Antenna Circuit for Wireless Power Transmission System Operating At ISM Band

Chuc Huu Doan, Duong Gia Bach

Abstract


This paper introduces an overview of a rectifying antenna (rectenna) circuit topology for microwave power transmission system. Specially, a rectenna based on a microstrip patch antenna and a microwave double voltage rectifier at 2.45GHz were designed and fabricated.  The antenna’s return loss is achieved of -15 dB at 2.45GHz. The microwave to DC conversion efficiency of the rectenna was measured as 71.5% with 22 dBm input power and 810 Ohm load. The design  and simulated results  were  carried out  by  the  microwave engineering professional  design software,  known as ADS2009 package. All design and simulation results will be reported.

Full Text:

PDF


DOI: http://doi.org/10.11591/ijece.v6i4.pp1522-1528

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

International Journal of Electrical and Computer Engineering (IJECE)
p-ISSN 2088-8708, e-ISSN 2722-2578

This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).