Fabrication and Analysis of Amorphous Silicon TFT

Srikanth G, Yadhuraj S R, Subramanyam T K, Satheesh Babu Gandla, Uma B V

Abstract


The display technology and large area electronics got momentum with the introduction of TFT devices. TFTs can be made using different semiconducting materials or organic conducting materials as the active layer. Each one of them differ in their performance depending on the material used for the active layer. In this paper, fabrication of amorphous silicon TFT using PECVD is carried out. Simulation of the a-Si: H TFT is also carried out with the dimensions similar to that of the masks used for the fabrication. The Id-Vd plot for both the simulation and fabrication is obtained and studied.

Keywords


amorphous silicon, fabrication, PECVD, sputtering, thin film transistor.

Full Text:

PDF


DOI: http://doi.org/10.11591/ijece.v7i2.pp754-758

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

International Journal of Electrical and Computer Engineering (IJECE)
p-ISSN 2088-8708, e-ISSN 2722-2578

This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).