Peak-to-average power ratio minimization and complexity reduction in MIMO-OFDM systems using spatial circular shifting and temporal interleaving method

Dubala Ramadevi, Polipalli Trinatha Rao


Multiple-input multiple-output orthogonal frequency division multiplexing(MIMO-OFDM) technological support for the simultaneous and frequent access by a large number of users to radio resources. For 5G cellular systems, this exhaust is not enough to provide physical layer services. An appropriate Peak-to-average power ratio (PAPR) minimization principle, which maximizes data capacity and channel utility, has been used to address this issue. In this paper, mainly focus on minimize the high PAPR of the candidate sequence of the OFDM sub-block using modified enhancement asymmetric arithmetic coding scheme (M-EAAC). According to this, circular shifting of the candidate sequence is established in the spatial circular shifting and temporal interleaving (SCS-TI) form to generated different set of conjugated phases which is multiplied with candidate sequence. Then, the transmitting antenna is identified the best lowest PAPR of the candidate sequence is chosen for entire OFDM data transmission. The simulation results conveys that the proposed SCS-TI method provide acceptable improvement in the PAPR reduction as compared with conventional selective mapping(SLM)and pseudo-random SLM(PR-SLM). Moreover, the complexity evaluation which ensure the proposed method provides better improvement at three important stages includes inverse fast Fourier transform (IFFT) operation, optimization process, and PAPR calculation at each candidate sequence.


Inverse fast Fourier transform; Low complexity; Modified enhancement asymmetric arithmetic coding scheme; Orthogonal frequency division multiplexing; Spatial circular shifting and temporal interleaving

Full Text:



Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

International Journal of Electrical and Computer Engineering (IJECE)
p-ISSN 2088-8708, e-ISSN 2722-2578

This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).