myBas driving cycle for Kuala Terengganu city

Abstract

Driving cycles are series of data points that represent vehicle speed versus time sequenced profile developed for specific road, route, city or certain location. It is widely utilized in the application of vehicle manufacturers, environmentalists and traffic engineers. Since the vehicles are one of the higher air pollution sources, driving cycle is needed to evaluate the fuel consumption and exhaust emissions. The main objectives in this study are to develop and characterize the driving cycle for myBAS in Kuala Terengganu city using established k-means clustering method and to analyse the fuel consumption and emissions using advanced vehicle simulator (ADVISOR). Operation of myBAS offers 7 trunk routes and one feeder route. The research covered on two operation routes of myBAS which is Kuala Terengganu city-feeder and from Kuala Terengganu to Jeti Merang where the speed-time data is collected using on-board measurement method. In general, driving cycle is made up of a few micro-trips, defined as the trip made between two idling periods. These micro-trips cluster by using the k-means clustering method and matrix laboratory software (MATLAB) is used in developing myBAS driving cycle. Typically, developing the driving cycle based on the real-world in resulting improved the fuel economy and emissions of myBAS.