A new Li-ion battery charger with charge mode selection based on 0.18 um CMOS for phone applications

Abstract

A new architecture of Li-Ion battery charger with charge mode selection is presented in this work. To ensure high efficiency, good accuracy and complete protection mode, we propose an architecture based on variable current source, temperature detector and power control. To avoid the risk of damage, the Li- Ion batteries charging process must change between three modes of current (trickle current (TC), constant current (CC), and constant voltage (CV)) in order to charge the battery with degrading current. However, the interest of this study is to develop a fast battery charger with high accuracy that is able to switch between charging modes without reducing its power efficiency, and to guarantee a complete protection mode. The proposed charger circuit is designed to control the charging process in three modes using the charging mode selection. The obtained results show that the Li-ion batteries can be successfully charged in a short time without reducing their efficiency. The proposed charger is implemented in 180 nm CMOS technology with a maximum charging current equal to 1 A and a maximum battery voltage equal to 4.22 V, (with input range 2.7-4.5 V). The chip area is 1.5 mm2 and the power efficiency is 90.09 %.