Water monitoring and analytic based thingspeak
Abstract
Diseases associated with bad water have largely reported cases annually leading to deaths, therefore the water quality monitoring become necessary to provide safe water. Traditional monitoring includes manual gathering of samples from different points on the distributed site, and then testing in laboratory. This procedure has proven that it is ineffective because it is laborious, lag time and lacks online results to enhance proactive response to water pollution. Emergence of the Internet of Things (IoT) and step towards the smart life poses the successful using of IoT. This paper presents a water quality monitoring using IoT based ThingSpeak platform that provides analytic tools and visualization using MATLAB programming. The proposed model is used to test water samples using sensor fusion technique such as TDS and Turbidity, and then uploading data online to ThingSpeak platform to monitor and analyze. The system notifies authorities when there are water quality parameters out of a predefined set of normal values. A warning will be notified to user by IFTTT protocol.
Keywords
IOT ;ThingSpeak ;Platform; Water quality; Arduino
Full Text:
PDFDOI: http://doi.org/10.11591/ijece.v10i4.pp3588-3595
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
International Journal of Electrical and Computer Engineering (IJECE)
p-ISSN 2088-8708, e-ISSN 2722-2578
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).