An Improved Design of Linear Congruential Generator based on Wordlengths Reduction Technique into FPGA
Abstract
This paper exposes an improved design of linear congruential generator (LCG) based on wordlengths reduction technique into FPGA. The circuit is derived from LCG algorithm proposed by Lehmer and the previous design. The wordlengths reduction technique has been developed more in order to simplify further circuit. The proposed design based on the fact that in applications only specific input data were used. Some nets connections between blocks of the circuit are ignored or truncated. Simulations either behavior or timing have been done and the results is similar to its algorithm. Four best Xilinx chips have been chosen to extract comparison data of speed and occupied area. Further comparison of occupied area in terms of flip-flop and full adder has been made. In general, the proposed design overcome the previous published LCG circuit.
Keywords
Linear Congruential Generator; FPGA; Xilinx; Wordlengths reduction; Improve LCG
Full Text:
PDFDOI: http://doi.org/10.11591/ijece.v5i1.pp55-63
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
International Journal of Electrical and Computer Engineering (IJECE)
p-ISSN 2088-8708, e-ISSN 2722-2578
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).