A Low Power 32 Bit CMOS ROM Using A Novel ATD Circuit

Siddhant Kukreti, Gurmohan Singh, Vemu Sulochana

Abstract


A low power high speed 32 Bit ROM circuit implemented on 0.18µm CMOS process has been presented in this paper. The circuit is build using a parallel ROM core structure and runs on 1.8 V supply voltage. A novel Address Transition Decoder (ATD) circuit is proposed which energizes the ROM components such as Row Decoder, Column Decoder, ROM core etc, for short time intervals when there is a transition in input address bits. The power consumed in ROM with proposed ATD circuit is 0.78 mW, which corresponds to 82.27% reduction in power as compared to ROM without ATD circuit (4.46 mW). At the output almost full signal swing has been achieved without using any sense amplifier. The implemented ROM has a very low latency of 0.56 ns.

DOI:http://dx.doi.org/10.11591/ijece.v3i4.3165


Keywords


CMOS Technology; Read Only Memory(ROM); Address Transition Decoder; Dual Edge Pulse Generator

Full Text:

PDF


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

International Journal of Electrical and Computer Engineering (IJECE)
p-ISSN 2088-8708, e-ISSN 2722-2578

This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).