Modeling the Vibrational Dynamics of Piezoelectric Actuator by System Identification Technique

Nurul Bahiah Mohd Noor, Mohd Ridzuan Ahmad

Abstract


Actuators based on smart materials such as piezoelectric actuators (PEAs) are widely used in many applications to transform electrical signal to mechanical signal and vice versa. However, the major drawbacks for these smart actuators are hysteresis nonlinear, creep and residual vibration. In this paper, PEAs are used for active vibration application. Therefore, a model of PEA must be established to control the vibration that occurs in the system. The frequencies of 1 Hz, 20 Hz and 50 Hz were tested on the PEAs. The results obtained from the experimental were used to develop transfer function model by employing system identification technique. Meanwhile, the model validation was based on level of models fitness to estimation data, mean squared error (MSE), final prediction error (FPE) and correlation test. The experimental result showed that the displacement of the actuator is inversely proportional to the frequency. The following consequences caused the time response criteria at 50 Hz achieved smallest overshoot and fastest response of rise time and settling time.

Keywords


Actuator, Piezoelectric, system identification, vibration

Full Text:

PDF


DOI: http://doi.org/10.11591/ijece.v7i3.pp1506-1512
Total views : 309 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.