FPGA Hardware Realization: Addition of Two Digital Signals Based on Walsh Transforms

Zulfikar Zulfikar, Shuja A Abbasi, Abdul Rahman M Alamoud

Abstract


This paper presents hardware realization of addition of two digital signals based on Walsh transforms and inverse Walsh transforms targeted to the Xilinx FPGA Spartan 3 board. The realization utilizes Walsh Transform to convert the input data to frequency domain and the inverse Walsh transform to reconvert the data from frequency domain. The designed system is capable of performing addition, subtraction, multiplication and Arbitrary Waveform Generation (AWG). However, in the present work, the hardware realization of addition only has been demonstrated. The Clock frequency for realization into the board is supplied by an external function generator. Output results are captured using a logic analyzer. Input data to the board (system) is passed manually through the available slide switches on-board.


Keywords


Hardware Realization; Digital Signal; Walsh Transforms; System-on-chip; FPGA

Full Text:

PDF


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

International Journal of Electrical and Computer Engineering (IJECE)
p-ISSN 2088-8708, e-ISSN 2722-2578