FACTS allocation considering loads uncertainty, steady state operation constraints, and dynamic operation constraints

M. M. H. Elroby, S. F. Mekhamer, H. E. A. Talaat, M. A. Moustafa Hassan

Abstract


This study proposes an algorithm to allocate different types of flexible AC transmission system (FACTS) in power systems. The main objective of this study is to maximize profit by minimizing the system’s operating cost including FACTS devices (FDs) installation cost. Dynamic and steady state operating restrictions with loads uncertainty are included in the problem formulation. The overall problem is solved using both teaching learning based optimization (TLBO) technique for attaining the optimal allocation of the FDs as main-optimization problem and matpower interior point solver (MIPS) for optimal power flow (OPF) as the sub-optimization problem. The validation of the proposed approach is verified by applying it to test system of 59-bus; Simplified 14-Generator model of the South East Australian power system.

Keywords


FACTS devices; optimal power flow; power system modeling; steady state and dynamic operation constraints; uncertainty;



DOI: http://doi.org/10.11591/ijece.v11i2.pp%25p
Total views : 0 times


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

ISSN 2088-8708, e-ISSN 2722-2578