ENHANCING THE CRI AND LUMEN OUTPUT FOR THE 6600 K WLED WITH CONVEX-DUAL-LAYER REMOTE PHOSPHOR GEOMETRY BY APPLYING RED-EMITTING MGSR3SI2O8:EU2+,MN2+ PHOSPHOR

Nguyen Doan Quoc Anh

Abstract


The traditional white LED product established with a single chip and a single phosphor results in a low color rendering index (CRI). The upgrade of LED package is comprised of two chips and one phosphor material and giving the higher CRI while keeping high luminous efficiency. Based on previous findings, the research paper performs the application of the two chips and two phosphors to enhance the color tunability of LEDs with different amounts and intensities of the two employed phosphors. Additionally, a color design model is built to serve the purpose of bettering the color fine-tuning of the white-light LED module. The maximum value of the difference between the measured CIE 1931 color coordinates and that of the simulated model is approximately 0.0063 around the 6600 K correlated color temperature (CCT). From the results, this study offers a quick approach to achieve the color fine tuning of a white-light LED module with a high CRI and luminous efficiency.

Keywords


MgSr3Si2O8:Eu2+,Mn2+, Dual-layer remote phosphor geometry, Color rendering index, WLEDs, Mie-scattering

References


A. A. Alatawi, et al., “High-power blue superluminescent diode for high CRI lighting and high-speed visible light communication,” Optics Express, vol. 26, pp. 26355-26364, 2018.

J. F. Ruan, et al., “Phase transformation induced reversible modulation of upconversion luminescence of WO3:Yb3+, Er3+ phosphor for switching devices,” Optics Letters, vol. 43, pp. 3885-3888, 2018.

Y. Yuan, et al., “High luminous fluorescence generation using Ce:YAG transparent ceramic excited by blue laser diode,” Optical Materials Express, vol. 8, pp. 2760-2767, 2018.

S. R. Chung, et al., “Full color display fabricated by CdSe bi-color quantum dots-based white light-emitting diodes,” Optical Materials Express, vol. 8, pp. 2677-2686, 2018.

F. Steudel, et al., “Pixelated phosphors for high-resolution and high-contrast white light sources,” Optics Express, vol. 26, pp. 26134-26144, 2018.

L. Tang, et al., “Photo-induced luminescence degradation in Ce, Yb co-doped yttrium aluminum garnet phosphors,” Applied Optics, vol. 57, pp. 7627-7633, 2018.

R. Lei, et al., “Influence of excitation power and doping concentration on the upconversion emission and optical temperature sensing behavior of Er3+: BaGd2(MoO4)4 phosphors,” Optical Materials Express, vol. 8, pp. 3023-3035, 2018.

X. Huang, et al., “High-efficiency and thermally stable far-red-emitting NaLaMgWO6:Mn4+ phosphorsfor indoor plant growth light-emitting diodes,” Optics Letters, vol. 43, pp. 3305-3308, 2018.

V. V. Bakhmet’ev, et al., “Effect of copper introduction and shock-wave processing of zinc sulfide on the spectral characteristics of a manganese-activated phosphor synthesized from it,” Journal of Optical Technology, vol. 85, pp. 367-370, 2018.

Y. Ma, et al., “Phosphor modeling based on fluorescent radiative transfer equation,” Optics Express, vol. 26, pp. 16442-16455, 2018.

Z. Wen, et al., “Fabrication and optical properties of Pr3+-doped Ba (Sn, Zr, Mg, Ta) O3 transparent ceramic phosphor,” Optics Letters, vol. 43, pp. 2438-2441, 2018.

X. L. Song, et al., “Biaxial hyperbolic metamaterials using anisotropic few-layer black phosphorus,” Optics Express, vol. 26, pp. 5469-5477, 2018.

J. Cao, et al., “Upconversion luminescence of Ba3La(PO4)3:Yb3+-Er3+/Tm3+ phosphors for optimal temperature sensing,” Applied Optics, vol. 57, pp. 1345-1350, 2018.

Y. Peng, et al., “Flexible fabrication of a patterned red phosphor layer on a YAG:Ce3+ phosphor-in-glass for high-power WLEDs,” Optical Materials Express, vol. 8, pp. 605-614, 2018.

H. Lee, et al., “Phosphor-in-glass with Nd-doped glass for a white LED with a wide color gamut,” Optics Letters, vol. 43, pp. 627-630, 2018.

T. X. Lee, et al., “Miniaturized LED primary optics design used for short-distance color mixing,” Applied Optics, vol. 55, pp. 9067-9073, 2016.

J. Gadegaard, et al., “High-output LED-based light engine for profile lighting fixtures with high color uniformity using freeform reflectors,” Applied Optics, vol. 55, pp. 1356-1365, 2016.

B. J. Chen, et al., “Freeform microstructure linear light emitter design for a natural light illumination system,” Applied Optics, vol. 54, pp. E159-E164, 2015.

S. P. Ying, et al., “Improving the color uniformity of multiple colored light-emitting diodes using a periodic microstructure surface,” Applied Optics, vol. 54, pp. E75-E79, 2015.

S. Wang, et al., “Improvement in angular color uniformity of white light-emitting diodes using screen-printed multilayer phosphor-in-glass,” Applied Optics, vol. 53, pp. 8492-8498, 2014.

W. S. Sun, et al., “Compact LED projector design with high uniformity and efficiency,” Applied Optics, vol. 53, pp. H227-H232, 2014.

M. L. Piao, et al., “Achieving high levels of color uniformity and optical efficiency for a wedge-shaped waveguide head-mounted display using a photopolymer,” Applied Optics, vol. 53, pp. 2180-2186, 2014.

K. C. Huang, et al., “Improved CCT uniformity of white LED using remote phosphor with patterned sapphire substrate,” Applied Optics, vol. 52, pp. 7376-7381, 2013.

S. Bindai, et al., “Realization of phosphor-in-glass thin film on soda-lime silicate glass with low sintering temperature for high color rendering white LEDs,” Applied Optics, vol. 58, pp. 2372-2381, 2019.

C. Huang, et al., “Bandwidth correction of spectral measurement based on Levenberg–Marquardt algorithm with improved Tikhonov regularization,” Applied Optics, vol. 58, pp. 2166-2173, 2019.




DOI: http://doi.org/10.11591/ijece.v10i4.pp%25p
Total views : 5 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.