Simple Measurement System for Biological Signal Using a Smartphone

Ryoichi Miyauchi, Koichi Tanno, Hiroki Tamura

Abstract


This paper describes simple measurement system for biological signal using smartphone. The proposed system consists of an instrumentation amplifier, a filter and an AC/DC converter. The biological signal is converted to the digital data through the microphone terminal with A/D converter in the smartphone. In many cases, the circuits require the power sources such as the cell batteries, however, the proposed system is supplied the power through the earphone terminal of the smartphone. Therefore, the proposed system no require the batteries. The software of this system parallelizes the processing so that the earphone output and the microphone terminal can be executed at the same time. The proposed system was verified through the measurement of surface electromyogram using discrete parts and iOS. Results of experimentation, the proposed system was operating correctly.


Keywords


AC/DC converter, biological signal, signal conditioning, smartphone,

Full Text:

PDF


DOI: http://doi.org/10.11591/ijece.v8i6.pp4157-4163

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

International Journal of Electrical and Computer Engineering (IJECE)
p-ISSN 2088-8708, e-ISSN 2722-2578

This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).