0.5 GHz-1.5 GHz Bandwidth 10W GaN HEMT RF Power Amplifier Design

Shiva Ghandi Isma Ilamaran, Zubaida Yusoff, Jahariah Sampe

Abstract


With the current development in wireless communication technology, the need for a wide bandwith in RF power amplifier (RF PA) is an essential. In this paper, the design and simulation of 10W GaN HEMT wideband RF PA will be presented. The Source-Pull and Load-Pull technique was used to design the input and output matching network of the RF PA. From the simulation, the RF PA achieved a flat gain between 15dB to 17dB from 0.5GHz to 1.5GHz. At 1.5GHz, the drain efficiency is simulated to achieve 36% at the output power of 40 dBm while the power added efficiency (PAE) was found to be 28.2%.

Keywords


GaN; RF power amplifier; wideband

Full Text:

PDF


DOI: http://doi.org/10.11591/ijece.v8i3.pp1837-1843

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

International Journal of Electrical and Computer Engineering (IJECE)
p-ISSN 2088-8708, e-ISSN 2722-2578

This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).