Gauss-Seidel Method based Voltage Security Analysis of Distribution System
Abstract
Complexity of modern power network and Large disturbance results voltage collapse. So, voltage security analysis is important in power system. Indicators are helpful in voltage stability analysis, as they give information about the state of the system. In this paper a new indicator namely Distribution System Stability Indicator (DSSI) has been formulated using the information of Phasor Measurement Unit (PMU).The proposed indicator (DSSI) is tested on standard IEEE 33 bus radial distribution system. The suggested indicator is also applicable to the equivalent two bus system of a multi-bus power system. The proposed indicator is calculated for different contingent conditions at different system load configurations. The result of DSSI is verified with the standard indicator (VSI) which proves applicability of the proposed indicator. The bus voltages of all the buses at base loading and at maximum loading are evaluated for base data and for tripping of most critical line.
Keywords
bus voltages; DSSI; Load multiplier factor; phasor measurement unit; voltage security
Full Text:
PDFDOI: http://doi.org/10.11591/ijece.v8i1.pp43-51
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
International Journal of Electrical and Computer Engineering (IJECE)
p-ISSN 2088-8708, e-ISSN 2722-2578
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).