Ohmic Contact characterization Using Image Processing

Shashikala B.N., Nagabhushana B.S.

Abstract


The Ti/Al/Ni/Au films deposited by electron beam evaporation on n type GaN was demonstrated as a suitable solution for low resistive and thermally stable contact to n-type GaN. The surface morphology of Ti/Al/Ni/Au and Ti/Al contacts were studied as a function of the annealing process conditions using image processing techniques. The algorithm was implemented using the MATLAB software. Using the algorithm made, the area occupied by the pores and porosity in the ohmic contact structures were obtained.

Keywords


GaN, ohmic contact, Porosity, surface morphology

Full Text:

PDF


DOI: http://doi.org/10.11591/ijece.v5i6.pp1347-1353

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

International Journal of Electrical and Computer Engineering (IJECE)
p-ISSN 2088-8708, e-ISSN 2722-2578

This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).