Investigations on real time RSSI based outdoor target tracking using kalman filter in wireless sensor networks

K. Vadivukkarasi, R. Kumar

Abstract


Target tracking is essential for localization and many other applications in Wireless Sensor Networks (WSNs). Kalman filter is used to reduce measurement noise in target tracking. In this research TelosB motes are used to measure Received Signal Strength Indication (RSSI). RSSI measurement doesn’t require any external hardware compare to other distance estimation methods such as Time of Arrival (TOA), Time Difference of Arrival (TDoA) and Angle of Arrival (AoA). Distances between beacon and non-anchor nodes are estimated using the measured RSSI values. Position of the non-anchor node is estimated after finding the distance between beacon and non-anchor nodes. A new algorithm is proposed with Kalman filter for location estimation and target tracking in order to improve localization accuracy called as MoteTrack InOut system. This system is implemented in real time for indoor and outdoor tracking. Localization error reduction obtained in an outdoor environment is 75%.

Keywords


distance estimation; kalman filter; localization; mote track inout system; position estimation; RSSI; target tracking;

Full Text:

PDF


DOI: http://doi.org/10.11591/ijece.v10i2.pp1943-1951

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

International Journal of Electrical and Computer Engineering (IJECE)
p-ISSN 2088-8708, e-ISSN 2722-2578

This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).